Brick Paver Installation & Edging



Staging of product

Many paver jobs will vary depending upon gain access to, website conditions, job size and naturally, the weather condition. These scenarios can have a total influence on your task from a timing stand point. Cautious consideration needs to be taken to figure out the time to start the paver installation. Always attempt to avoid any traffic or reduce on the prepared areas.

The supervisor or project supervisor must constantly have the materials (sand/ pavers) dispersed around the job website for simple and effective installations. Paver pallets/bundles ought to be placed in a way not to disrupt the paver installation. The proper pallet/bundle placement can make the real project installation much easier and quicker by lowering the general labor of handling the material.

Brick paver patterns

Pavers can be put in many different patterns depending on their shape. Each paver shape will generally have several various hatch patterns that are provided by the maker.

Specialists need to take into consideration the traffic weight loads on their paver jobs. In the majority of applications around the world, it has been revealed that pavers laid in a herringbone pattern have actually performed adequately.

Pavers that are 60 mm (2 - 3/8 in) density appropriate for pedestrian applications. Pavers that are going to be utilized in commercial or industrial applications ought to be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a variety of conditions that identify the beginning point of a paver job.

When beginning to set up pavers it is best to snap a true straight chalk line on the surface of the bed linen sand or pull a true straight string line above the surface of the bedding sand at the completed elevation of the pavers This will help as a guide for preserving straight joint lines and will also permit the installer to make adjustments in the positioning of the pavers.

Buildings and concrete curbing are typically not straight and should not be utilized for developing straight joint lines. The usage of string lines is essential to identify the true straightness of the edge. As the paver installation advances, the string lines will help lessen the requirement for small trim pieces.

These will preserve a minimum joint width and permit the bedding and jointing sand to go into between each paver. Pavers with spacer bars are typically not laid in snug versus each other because a string line will supply constant joint spacing.

Installation of brick pavers.

One of the most extensively utilized approaches for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the true straight lines that you have pulled or above the bedding sand. The best method is to place a paver against another one and let it slide down into the bed linen sand.

When setting up pavers on a high grade, they need to be set up at the base of the grade going uphill. This will avoid the pavers from sneaking as they are being laid.

On big industrial and industrial applications, hand laying pavers would not be cost effective due to the labor intensity. The best way for installing pavers on big tasks is to install them mechanically. The use of a mechanical laying device can install approximately 6000 - 7000 sq ft a day. There are a couple items a contractor need to think about prior to setting up pavers mechanically:

1.) Mechanical installers are just efficient in setting up pavers in specific patterns.

2.) The contractor must make sure that the maker can production and bundling pavers in the preferred pattern on the pallets for easy mechanical installation.

3.) Contractors may come across a color mixing circumstance coming off the bundles of pavers Poor color mixing might result in a patchy looking installation. Most makers follow color mixing on each bundle of pavers, however it is the specialist's duty to guarantee proper blending in the field.

Cutting procedures for brick pavers.

Specialists usually have two methods of cutting pavers. When cutting pavers wet, it will help decrease dust and will extend the diamond blades life. The operator of the brick saw should constantly cut the pavers away from the surface of the paver field when cutting damp, due to the truth that the pavers will create a slurry that will stain the paver surface.

The brick saw operator needs to constantly wear the correct security that is needed for running a saw, such as eye, ear, respiratory and hand protection ).

Edging types

Edge restraints play a major function in the general success of an interlocking pavement installation Edging restraints remove lateral movement of the pavers and hold the pavers securely together. Particularly at the external perimeter of the paver application, without an edging restraint, your task is guaranteed to stop working gradually.

There are several various edging restraints from which contractors can pick. Generally manufactured edge restraints are the most typically used by specialists. Manufactured edging restraints can vary from, plastic edging, steel and aluminum, woods or precast concrete and stone. An edging type that is utilized mainly in commercial and commercial applications is poured-in-place concrete curbs. This edging restraint is normally installed by other specialists.

Edging installation.

This could result in the migration of the bed linen sand and ultimate lateral movement of the pavers. If there is a possibility of losing bed linen sand in between the pavers and the edge restraint, then geo textile fabric is suggested. When a gap in between the pavers and the edging goes beyond 3/8" (10mm), then the space must be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compacted. The whole area that is to be compacted must be swept tidy of any foreign objects and particles that can trigger scratching or scuffing on the surface of the pavers.

It is very important to have a compactor that can apply between 3000lbs. And 5000 pounds. Of centrifugal compaction force. In addition, it is important that the very first compaction happens before any jointing sand has been applied to South Florida Pavers the pavers. This can trigger a bridging issue and will not allow the joints to be completely filled with jointing sand if jointing sand is applied to the pavers prior to compaction takes location. This can also prevent the pavers from being appropriately set into the bed linen sand.

When compacting the pavers, it is advised that you make at least two passes in various instructions throughout the pavers. This will allow the pavers to be effectively set in the bedding sand and will force the bed linen sand up into the joints from the bottom of the pavers.

The compaction of the pavers is extremely critical to the final efficiency of the pavers. Failure to do proper compaction can result in deformations and pavement failure gradually.


Paver pallets/bundles need to be placed in a manner not to interfere with the paver installation. One of the most commonly utilized approaches for the installation of pavers is hand installation of each paver. The operator of the brick saw need to always cut the pavers away from the surface of the paver field when cutting wet, due to the truth that the pavers will produce a slurry that will stain the paver surface area. Edging restraints remove lateral motion of the pavers and hold the pavers tightly together. When a gap between the pavers and the edging exceeds 3/8" (10mm), then the space ought to be filled with cut pavers.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Brick Paver Installation & Edging”

Leave a Reply

Gravatar